Video Light Stand (RaLeno)
por Sebastian en Printables
A cheap but high quality Video Light stand designed (not only) for RaLeno LED Video Light.
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Sebastian.
Archivos (12)
- stand-stiffener-m5-15mm.stl STL · 8 KB
- stand-m5-15mm.stl STL · 216 KB
- wheel-m5-15mm.stl STL · 632 KB
- clamp-m5-15mm.stl STL · 434 KB
- stand-stiffener-m6-half-inch.stl STL · 21 KB
- stand-m6-half-inch.stl STL · 813 KB
- clamp-m6-half-inch.stl STL · 1,8 MB
- wheel-m6-half-inch.stl STL · 2,7 MB
- stand-m6-15mm.stl STL · 216 KB
- wheel-m6-15mm.stl STL · 2,7 MB
- stand-stiffener-m6-15mm.stl STL · 8 KB
- clamp-m6-15mm.stl STL · 1,8 MB
- Categoría
- Tecnología
- Formatos
- STL
- Descargas
- 225
- Publicado
Sobre este modelo
A cheap but high quality Video Light stand designed (not only) for RaLeno LED Video Light.
There are three versions available: - Metric version using a 15mm tube and an m6x35 nut and bolt, - Metric version using a 15mm tube and an m5x35 nut and bolt, and - Imperial version using a ½ inch tube and an m6x35 nut and bolt.
Partslist, assembly instructions (video), and more info about the design process on my blog: https://blog.hirnschall.net/diy-video-light-stand/
Descripción original del autor, publicada en Printables.
