Vekoma Classic Roller Coaster Car
por Thomas en MyMiniFactory
Thanx to Tim (https://www.myminifactory.com/object/3d-print-classic-roller-coaster-train-142420) and Don1975 (https://www.thingiverse.com/thing:39229) for their good work.
MyMiniFactory entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Thomas.
Archivos (15)
- Back Cover 4 Pc.stl STL
- body.stl STL
- Caps Left Right 4 Pc.stl STL
- Coupling Front Back.stl STL
- Nose Top.stl STL
- Nose Underneath.stl STL
- Principal Axis 2 Pc.stl STL
- Safety Bracket Print 4.Stl STL
- subframe.stl STL
- Support Base 2 Pc.stl STL
- Support Stands Short Long.stl STL
- Wheel Carrier Inside Print 4.Stl STL
- Wheel Carrier Outside Print 4.Stl STL
- Wheels 2 Sets With Axes Print 2.Stl STL
- Wheels 2 Sets Without Axes Print 2.Stl STL
- Categoría
- Repuestos
- Formatos
- STL
- Descargas
- 352
- Publicado
Sobre este modelo
Thanx to Tim (https://www.myminifactory.com/object/3d-print-classic-roller-coaster-train-142420) and Don1975 (https://www.thingiverse.com/thing:39229) for their good work. I changed nearly every part a little bit, so I post this here as a remix. I made the back covers slightly smaller, so they will fit easily into the openings of the body. The axes of the wheels are so fragile to print that they will easily break, I replaced them with glued 3x16 mm screws (slotted pan head, 20 pc). You find in the parts both versions, with or without axes. The connections of the couplings to the body are modified (consider front and back), and the couplings are attached to the major axes with two black 4x30 mm screws (hexagon socket). I did not print the rails, you can use either acrylic 12x250 mm rods or painted wooden rods.
Descripción original del autor, publicada en MyMiniFactory.
