V3 Series - Twisted Heart Passthrough

Note: AMS Profiles work without AMS - It will only print the one color

The Design

A Small passthrough Heart for Valentines, Compatible with the Rest of my V3 Series.

The Heart inner is 33mm high by 35mm wide (23mm deep)

The outer part is somewhat fragile - there is a tight balance between it's strength and looking good

Let me know if you experience any issues.

"Boosts" reward the Creators of models you like. A boost gives the models creator $1 worth of points.

If you like this model please consider giving it a Boost!

Boost MeNever Needed, Always appreciated

Printing

Please ensure your built plate is clean and your filament is dry - The surface area on the heart inner is quite low, so needs good bed Adhesion.

Because the outer part is a little fragile Silk PLA is not recommended for the outer part The inner part may need some minor clean up from where it touches the supports / build plate

The settings in my profiles have been optimized for my design, let me know if you have issues and i'll try to help

Once printed let the build plate cool before trying to remove.

My Work

Fed up of the corporate world of Big Engineering, I've decided to follow my childhood dream by trying to become a Creative Designer. A Creative Designer of what? All things fun, exciting, interesting and challenging! Spirals are my current area of focus!

It's been a Roller Coaster but I'm almost there now!

MembershipIf you want to sell prints of my designs, please subscribe to the commercial license. Thank you! Or you can join my Patreon for More Exclusive Designs here: https://www.patreon.com/RJ_Design