USB Stick Holder
por Mel Patrick en Thingiverse
I really liked the design of the USB holder, but found that as others had pointed out with the first (taller) design, there were at least 3 layers missing when using Slicer. So I printed the lower poly version but the side slots for the SD and Micro SD cards are so close that it's awkward to get...
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Mel Patrick.
- Categoría
- Herramientas
- Formatos
- STL
- Descargas
- 41,610
- Publicado
Sobre este modelo
I really liked the design of the USB holder, but found that as others had pointed out with the first (taller) design, there were at least 3 layers missing when using Slicer. So I printed the lower poly version but the side slots for the SD and Micro SD cards are so close that it's awkward to get them in and out. I decided to see if I could fix the taller design so Slicer wouldn't miss layers. I tried with netFabb first but that crashed every time on export after the repair. So instead I imported the original file into Tinkercad, exported it back out as an STL file, loaded that into netFabb, repaired the layers, then exported the design. It worked out perfect. I posted the fix here but the awesome design credit goes to the original creator!
Descripción original del autor, publicada en Thingiverse.
