Universal stand-alone filament spool holder (Fully 3D-printable)
por Creative Tools en Thingiverse
Creative Tools Creative Tools supplies 3D printer and 3D scanner products incl filaments, accessories and support and also 3D software for leading CAD, modeling, animation, and rendering. A fully 3D-printable rotating stand for filament spools, designed to be easily made without the need for...
Licencia
Uso comercial permitidoPuedes imprimirlo, modificarlo y venderlo dando crédito al autor.
Al descargar aceptas respetar la licencia y dar crédito a Creative Tools.
Archivos (32)
- Spool-less_coil_holder__attachment_.stl STL · 629 KB
- Spool_spindle.stl STL · 2,0 MB
- Spool-less_coil_holder__main_.stl STL · 1,3 MB
- Guide-tube_holder_and_filament_filter.stl STL · 1,8 MB
- Bearing_wheel.stl STL · 47 KB
- Centerring_and_locking_cone.stl STL · 833 KB
- Tripod_base.stl STL · 3,3 MB
- All_parts_MakerBot_Replicator_2_and_2X.stl STL · 10,8 MB
- Assembly__complete_.stl STL · 10,8 MB
- All_parts_200x200x115_mm_build_volume.stl STL · 10,8 MB
- Centerring_and_locking_cone_tip_down.stl STL · 833 KB
- Base_on_2020_Al_beam_extrusion.stl STL · 1,4 MB
- Base_on_2020_Al_beam_extrusion_v02.stl STL · 1,5 MB
- Spool_spindle_200mm_tall.stl STL · 2,0 MB
- Centerring_and_locking_cone__flat_base_.stl STL · 840 KB
- Base_on_3030_Al_beam_extrusion.stl STL · 1,7 MB
- Base_on_2525_Al_beam_extrusion.stl STL · 1,7 MB
- Guide-tube_holder_and_filament_filter__shorter_.stl STL · 1,9 MB
- Base_on_4020_Al_beam_extrusion.stl STL · 1,6 MB
- Base_for_Printrbot.stl STL · 1,6 MB
- Base_on_4040_Al_beam_extrusion.stl STL · 1,8 MB
- Base_on_1515_Al_beam_extrusion.stl STL · 1,6 MB
- Centerring_and_locking_cone__narrow_.stl STL · 1,1 MB
- Spool_spindel__4_inches_tall_.stl STL · 2,0 MB
- Base_on_Al_beam_extrusion_top_Split_version_adapted_by_Elmo_Clarity.stl STL · 1,2 MB
- Base_on_2020_Al_beam_extrusion_Split_version_adapted_by_Elmo_Clarity.stl STL · 1,4 MB
- Base_on_4020_Al_beam_extrusion_Split_version_adapted_by_Elmo_Clarity.stl STL · 1,9 MB
- Spool-less_coil_holder__attachment_v02.stl STL · 658 KB
- Spool-less_coil_holder__main_v02.stl STL · 1,4 MB
- Base_for_Robo_3D_R1.stl STL · 2,7 MB
- Guide-tube_holder_and_filament_filter__longer_.stl STL · 1,8 MB
- Universal_stand-alone_filament_spool_holder_3D-printable_-_By_CreativeTools.se.stp STP · 12,5 MB
- Categoría
- Para tu impresora
- Formatos
- STL, STP
- Descargas (todas las plataformas)
- 155,648
- Publicado
También en
Sobre este modelo
Creative Tools Creative Tools supplies 3D printer and 3D scanner products incl filaments, accessories and support and also 3D software for leading CAD, modeling, animation, and rendering. A fully 3D-printable rotating stand for filament spools, designed to be easily made without the need for fasteners such as screws, nuts, shafts, glue, etc. Every single component in this spool holder comes right from your 3D printer's filament. The spool holder's spindle is shaped to fit the vast majority of commonly used filament spools with shaft holes ranging from 16 mm to 62 mm in diameter. It is also compatible with spool-less filament coils. The spindle which holds the spool's weight rotates on its own roller wheels, which makes it turn effortlessly. The spool holder included an arm for filament guide tubes of both common sizes 1.75 mm and 3.0 mm. The arm also contains a pocket for inserting a piece of sponge which acts a a filament filter - thus keeping the filament clean and lubricated. FEATURES - Easy to 3D print - Needs no glue or fasteners - All parts can be 3D-printed - Fits almost any filament spool size - Has built-in filament filter! - Can also hold spool-less filament coils - Base versions available for standing on flat surfaces or fit on extruded aluminium profiles. Next time you need a new filament spool holder, just 3D-print one! :)
Please also see our Universal Cantilevered Spool Holder for 3D printers http://www.thingiverse.com/thing:2297303 By Creative Tools Home - YouTube - Things - #3DBenchy - Twitter - Facebook - Instructables - Instagram - Pinterest - Flickr - LinkedIn
Descripción original del autor, publicada en Thingiverse.
