Unifi G6 Turret Cam Floodlight Mount
por Alex Peck en Thingiverse
This is an adapter to mount a G6 turret cam to a standard box and add 2 standard bulb fixtures with 1/2" npt threads. Threads are not modeled and need to be tapped. Should fit any round box with the smaller screw spacing, around 70mm. Uses 6-32 screws to mount cam to mount, and mount to box. Print..
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Alex Peck.
- Categoría
- Jardín
- Formatos
- STEP, STL
- Descargas
- 3
- Publicado
Sobre este modelo
This is an adapter to mount a G6 turret cam to a standard box and add 2 standard bulb fixtures with 1/2" npt threads. Threads are not modeled and need to be tapped. Should fit any round box with the smaller screw spacing, around 70mm. Uses 6-32 screws to mount cam to mount, and mount to box. Print with high wall count for tapping and strength, i did 6 walls 25% gyroid with asa filament and it works great. There should be enough room behind it to add smart relays, i put 2 to control the lights separately
Descripción original del autor, publicada en Thingiverse.
