Ultra-Slim CR2032 Emergency Keyfob Case – "Don't Get Locked Out!"

Is your car's remote key battery dead? Don't get stranded! This new ultra-slim and minimalist version is designed to hold a spare CR2032 lithium battery directly on your keychain, without the bulk of screw-thread models. 💡 Looking for the original version with a screw cap? You can find the threaded capsule model here: CR2032 Emergency Keyfob Capsule

⚙️ Minimalist Design & Compact Dimensions: - Ultra-Compact Size: Outer diameter of just 22.8 mm and a total thickness of only 6.6 mm! - Slide-In & Snap-Lock: Features a sleek side-entry slot. Two internal retention tabs securely lock the battery in place. - Fast & Easy Ejection: The top surface features an ergonomic thumb/fingernail groove. Simply push the battery with your finger to slide it out instantly. - Ultra-Low Profile: Significantly smaller and thinner than threaded designs. Fits seamlessly alongside your modern car key fob without adding pocket bulk. - Visual Confirmation: The open top slot lets you check at a glance that a battery is loaded (and read the CR2032 text). - Single-Piece Design: The main body and retention mechanism print as a single piece. No caps to unscrew or lose!

🖨️ Recommended Print Settings: - Layer Height: 0.12 mm to 0.20 mm (Lower layer height ensures smoother and stronger retention tabs) - Wall Loops / Perimeters: 3 or 4 (For maximum structural rigidity) - Infill: 100% (Recommended for maximum strength on such a small functional print) - Supports: NO SUPPORTS NEEDED! - Orientation: Print flat on the build plate. - Material: PLA, PETG, or ABS/ASA (PETG or higher recommended for heat resistance inside a hot car during summer).

💬 Support & Feedback If you like this design, please consider leaving a Like and a Boost, and don't forget to share a photo of your make! Happy printing! 🚀