Two Fences (1 & 2)
por 5-LOXIN en Thingiverse
A fence is a structure that encloses an area, typically outdoors creating a boundary, and is usually constructed from posts that are connected by boards, wire, rails or netting. Size/s: 150mm x 150mm x 60mm (Metal-filled and wood-filled 3D printing filaments both use a base polymer (typically PLA)..
Licencia
Solo uso personalCC BY-NC-ND 4.0 — Atribución, no comercial, sin derivadas
Solo para uso personal, sin modificarlo y dando crédito. No se permite vender ni redistribuir cambios.
Al descargar aceptas respetar la licencia y dar crédito a 5-LOXIN.
Archivos (2)
- Categoría
- Cosplay y props
- Formatos
- STL
- Descargas
- 2
- Publicado
Sobre este modelo
A fence is a structure that encloses an area, typically outdoors creating a boundary, and is usually constructed from posts that are connected by boards, wire, rails or netting. Size/s: 150mm x 150mm x 60mm (Metal-filled and wood-filled 3D printing filaments both use a base polymer (typically PLA) mixed with dense natural or metallic particles.) • Wood Filament: • Nozzle: 190°C – 220°C (keep on the lower end to avoid scorching or burning the wood fibers, which causes dark streaks and clogs). • Bed: 45°C – 60°C (often optional or low-temp, similar to standard PLA). • Metal Filament: • Nozzle: 190°C – 270°C (frequently runs hotter depending on the specific metal powder and carrier resin ratio). • Bed: 60°C – 100°C (higher bed temperatures are often recommended to prevent warping from heavy metal loading).
Descripción original del autor, publicada en Thingiverse.
