Twistwave Cup – Twisted 6-Point Desk Cup (No Supports)
por Fneto en Printables
A twisted six-lobed cup that rotates 100° from base to rim. Use it as a pen and brush holder on your desk, or as a small
Licencia
Uso comercial permitidoPuedes imprimirlo, modificarlo y venderlo sin pedir permiso ni dar crédito.
Al descargar aceptas respetar la licencia y dar crédito a Fneto.
Archivos (1)
- Categoría
- Educación
- Formatos
- 3MF
- Descargas
- 2
- Publicado
Sobre este modelo
Description A twisted six-lobed cup that rotates 100° from base to rim. Use it as a pen and brush holder on your desk, or as a small planter with a liner inside. It prints upright with no supports, and the layers come out smooth with a clean, crisp rim. It’s about 86 x 85 mm wide and 100 mm tall, with 2.4 mm walls and a solid floor. It is not watertight enough to hold water directly, so use a liner or a jar for fresh flowers. Print settings - Printer: FlashForge AD5X, 0.4 mm nozzle
- Slicer: Orca-FlashForge
- Profile: 0.16 mm Standard @FF AD5X
- Layer height: 0.16 mm (first layer 0.2 mm)
- Walls: 2 loops
- Top / bottom shell layers: 5 / 3
- Infill: 15%, cross hatch
- Supports: none
- Orientation: upright, as exported
Descripción original del autor, publicada en Printables.
