True fruits watering can
por Gazzaladra en Thangs
A watering can attachment for a True Fruits bottle.
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Revisa las condicionesStandardDigitalFileLicense
El autor usa su propia licencia. Revisa sus condiciones en la página original antes de compartir, modificar o vender.
Al descargar aceptas respetar la licencia y dar crédito a Gazzaladra.
Archivos (1)
- watering_can_V2.stl STL · 4,1 MB
- Categoría
- Herramientas
- Formatos
- STL
- Descargas
- 408
- Publicado
Sobre este modelo
A watering can attachment for a True Fruits bottle. The top can be filled up without having to unscrew it. I had problems with watering cans that are too big for the sink and this one can be kept horizontal and therefore is easier to fill.
Size: 60 x 60 x 120 mm This is the V2
Print settings Required build volume: 60 x 60 x 120 mm Material usage: 45g Print time: 4h-5h
Material: PLA Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm – 0,28mm Outer walls: 3 Infill: 20% Build plate adhesion type: a brim if you have bad bed adhesion
Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.
Descripción original del autor, publicada en Thangs.
