Trippy Colour Lithophane
I printed it with a 0.4mm nozzle at 0.1mm layer height and 0.2mm first layer. I have attached a .3mf for the Bambu Lab and the individual stl files if you have a different multi-colour system. Each file is labelled with the colour that you assign it and you need to import the set as a multi-part mod
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Revisa las condicionesStandardDigitalFileLicense
El autor usa su propia licencia. Revisa sus condiciones en la página original antes de compartir, modificar o vender.
Al descargar aceptas respetar la licencia y dar crédito a Natalie C.
Archivos (6)
- cyan.stl STL · 7,2 MB
- magenta.stl STL · 6,8 MB
- white1.stl STL · 23,9 MB
- white2.stl STL · 12,7 MB
- yellow.stl STL · 5,3 MB
- Trippy Lithophane.3mf 3MF · 9,4 MB
- Categoría
- Figuras y arte
- Formatos
- STL, 3MF
- Descargas
- 118
- Publicado
Sobre este modelo
I printed it with a 0.4mm nozzle at 0.1mm layer height and 0.2mm first layer. I have attached a .3mf for the Bambu Lab and the individual stl files if you have a different multi-colour system. Each file is labelled with the colour that you assign it and you need to import the set as a multi-part model.
Descripción original del autor, publicada en Thangs.
