Tribute to the RB26 Engine (Fanmade Model)
por Danko_Creates en MakerWorld
MembershipIf you like what i'm doing and want to support future projects, i started a membership program. I can't describe how much this will mean to me, your support is very much appreciated. Thank you! :)
MakerWorld entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalStandard Digital File License
Licencia estándar de archivos digitales: solo uso personal. No se permite compartir, revender ni subir el archivo a otros sitios, ni vender las impresiones.
Al descargar aceptas respetar la licencia y dar crédito a Danko_Creates.
Archivos (58)
- base plate for a1 mini.stl STL · 66 KB
- base plate.stl STL · 78 KB
- base solid.stl STL · 260 KB
- oil sump holder.stl STL · 1 KB
- pillar driver side.stl STL · 58 KB
- pillar pass seat.stl STL · 58 KB
- air filter body.stl STL · 4,2 MB
- air filter cap.stl STL · 590 KB
- air filter hose.stl STL · 8,1 MB
- alternator belt.stl STL · 806 KB
- alternator pulley.stl STL · 2,3 MB
- belt big.stl STL · 2,4 MB
- cooling fan belt pulley.stl STL · 6,8 MB
- downpipe.stl STL · 3,8 MB
- main pulley.stl STL · 4,5 MB
- starter black part.stl STL · 4,9 MB
- valve cover inlay.stl STL · 813 KB
- oil filter.stl STL · 1,6 MB
- turbo exhaust.stl STL · 6,5 MB
- air filter.stl STL · 3,1 MB
- front axle shaft.stl STL · 1,8 MB
- front drive.stl STL · 8,6 MB
- intake.stl STL · 8,5 MB
- motor.stl STL · 2,8 MB
- oil sump.stl STL · 11,5 MB
- valve cover connector.stl STL · 1 KB
- valve cover.stl STL · 24,2 MB
- aeroquip plugs 2x.stl STL · 1,9 MB
- alternator.stl STL · 10,2 MB
- belt cover inlet.stl STL · 3,2 MB
- cooling fan motor.stl STL · 3,2 MB
- cooling fan mount.stl STL · 7,0 MB
- cylinder block solid.stl STL · 13,8 MB
- engine mount left.stl STL · 1,7 MB
- engine mount right.stl STL · 1,8 MB
- exhaust manifold.stl STL · 17,2 MB
- fuel rail.stl STL · 1,5 MB
- oil cap.stl STL · 13,3 MB
- oil pipe.stl STL · 5,2 MB
- starter silver part.stl STL · 1,0 MB
- throttle.stl STL · 4,3 MB
- turbo backplate.stl STL · 21,3 MB
- valve cover ecu.stl STL · 835 KB
- wastegate.stl STL · 1,5 MB
- y-pipe.stl STL · 2,0 MB
- turbo.stl STL · 1,7 MB
- oil pump.stl STL · 6,5 MB
- belt middle.stl STL · 2,6 MB
- engine block.stl STL · 23,7 MB
- cooling fan.stl STL · 3,3 MB
- cylinder block part 3.stl STL · 322 KB
- cylinder block part 4.stl STL · 1,1 MB
- cylinder block part 1.stl STL · 5,7 MB
- cylinder block part 2.stl STL · 5,5 MB
- Intake throttle.stl STL · 20,3 MB
- gearbox plate.stl STL · 5,5 MB
- lower engine mount - exhaust side.stl STL · 1,7 MB
- belt cover.stl STL · 11,6 MB
- Categoría
- Educación
- Formatos
- STL
- Descargas
- 14,692
- Publicado
Sobre este modelo
MembershipIf you like what i'm doing and want to support future projects, i started a membership program. I can't describe how much this will mean to me, your support is very much appreciated. Thank you! :) Update 23.03.2025: i created a display box to keep dust away. it's customizable and you can use it for other purposes too :) https://makerworld.com/en/models/1240033-display-box-customizable#profileId-1260326 --------------------------
Update 05.01.2025: new base available here… https://makerworld.com/en/models/955801#profileId-924720 -------------------------------------------------------
PLEASE READ BEFORE PRINTING: Selling this file or using it for printing the model for commercial use is NOT allowed!
Update 10.11.2024: optimized the gearbox plate and added the fuel rail assemby in the guide Update 31.10.2024: following parts are updated/repaired → engine block, oil pump, cooling fan, middle belt and cylinder block parts 1 to 4 (all four)!
I'm thrilled to present you my latest work. It's 1/5 scale single turbo fanmade version of the legendary RB26 engine and a tribute to it. I tried to catch as much details as possible and still make it printable with an FDM printer. It was a huge amount of work and lot of testing and tweaking went into it, to delivery you the best possible quality. Most of the parts should fit without any gluing, but since you don't want them to accidently fall apart, I recommend you to use some PLA or CA glue. I've spent also a lot of time to make a assembly guide, to make the assembly process as comfortable as possible for you, since there are a lot of parts that has to be put together. If you are still struggling, just let me know. You can find the PDF down bellow.
Optional: to add more realism to the model, you can use some chrom and black markers for the details like i did. I've also used a piece of leather for the top surface of the base. You can use the photos and the assembly guide for reference what color for what detail. You probably can use the AMS system if you have one, instead of painting, but I haven't tested it.
Idea: if you have some effect sheet plates, you can print the base plate topdown, to achieve an effect on the top surface (f.e. carbon effect). All STLs are avaible for download.
There are also solid version of the base and the cylinder block if you want to print them in one piece. I've separated them for better result.
Print profile settings: - layer height: 0,16 mm - print speed: 120 - Infill: 15% - tree supports
I hope you like this model and feel free to let me know what you think about it. For now there's nothing more to add except, have fun printing :D
Greets, Danko
Descripción original del autor, publicada en MakerWorld.
