Totally cute animal home / pet house with cat or mouse ears
por Ben Burnski en Printables
Designed to provide your cat or dog with a place of retreat where your little four-legged friend can feel safe and find.
Licencia
Solo uso personalCC BY-NC-ND 4.0 — Atribución, no comercial, sin derivadas
Solo para uso personal, sin modificarlo y dando crédito. No se permite vender ni redistribuir cambios.
Al descargar aceptas respetar la licencia y dar crédito a Ben Burnski.
Archivos (21)
- top part connector you need 4x.stl STL · 650 KB
- big bone you need 4x.stl STL · 805 KB
- cave entrance ring bones you need 2x.stl STL · 553 KB
- big part connector you need 8x.stl STL · 543 KB
- pins.stl STL · 5,3 MB
- center ring.stl STL · 10,2 MB
- top part side you need 3x.stl STL · 15,6 MB
- bottom case you need 4x.stl STL · 18,7 MB
- top part front side you need 1x.stl STL · 18,5 MB
- leg you need 4x.stl STL · 18,4 MB
- montage hilfe.stl STL · 18,6 MB
- middle part you need 3x.stl STL · 27,6 MB
- middle part front side you need 1x.stl STL · 29,7 MB
- cave entrance ring.stl STL · 34,4 MB
- ear backside left.stl STL · 6,4 MB
- ear backside right.stl STL · 6,4 MB
- ear frontside left.stl STL · 11,7 MB
- ear frontside right.stl STL · 11,6 MB
- ear inside left.stl STL · 20,2 MB
- ear inside right.stl STL · 19,9 MB
- manual_final.pdf PDF · 12,8 MB
- Categoría
- Hogar
- Formatos
- STL, PDF
- Descargas (todas las plataformas)
- 613
- Publicado
También en
Sobre este modelo
This pet house was designed to provide your cat or dog with a place of retreat where your little four-legged friend can feel safe and find peace and quiet. It is designed as a decorative cat house and tailored to the needs of your cat, but is also ideal for other animals such as dogs. It offers plenty of space and the double walls in combination with the filling inside make this pet house very well soundproofed! This offer consists of two parts, the pet house and the optional design elements that give this pet house a cat or mouse flair, which you can attach to the outside with a little glue!
Important: This pet house is very large and can be printed on a printer with a build volume of 350 x 350 x 350 mm, resulting in an incredible base area (diameter) of 562 mm and a height of 570 mm with feet. Depending on your print settings, you will need approximately 3.8 kg of filament. Assembly instructions with lots of pictures are included as a PDF. Special features when printing: All parts are designed so that no large support structures are required. This saves a lot of time and material! All parts are slotted together so that your pet is not exposed to any glue odors. Only the outer design elements require the use of glue, so please allow this pet house to air out for a while. I recommend creating your own print profile in your slicer so that all parts can be printed identically. - Material PLA or PLA+, -Two favorite colors (single color also looks cool),
- 2 walls,
- large-format printer (350x350x350 mm or scale to max. 50%), (300x300x300 mm = 85% scale),
- 10% infill (grid = better sound reduction)
- approx. 3.7 kg of material
Descripción original del autor, publicada en Printables.
