Torque Wrench
por Konrad en MyMiniFactory
Here is a collection of a few fully printable torque wrenches.
MyMiniFactory entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Konrad.
Archivos (15)
- 10P1W 1P5.Stl STL
- 10P1W 2.Stl STL
- 10P1W 2P5.Stl STL
- 13P1W 1P5.Stl STL
- 13P1W 2.Stl STL
- 13P1W 2P5.Stl STL
- 5P6W 1P5.Stl STL
- 5P6W 2.Stl STL
- 5P6W 2P5.Stl STL
- 7P1W 1P5.Stl STL
- 7P1W 2.Stl STL
- 7P1W 2P5.Stl STL
- 8P1W 1P5.Stl STL
- 8P1W 2.Stl STL
- 8P1W 2P5.Stl STL
- Categoría
- Herramientas
- Formatos
- STL
- Descargas
- 705
- Publicado
Sobre este modelo
Here is a collection of a few fully printable torque wrenches.
The actual torque is dependent on the material, print settings and spring width. All sizes are available with 3 spring widths (1.5mm, 2mm and 2.5mm) to give some degree of freedom in achieving the desired torque. The arc provides a place to add a scale. This will require a calibration with a known torque. Adding some sort of pointy indicator is probably also useful in that case.
The files are named after the width of the wrench and the width of the spring. To give an example: 5p6w_2 will have a wrench size of 5.6mm and a spring thickness of 2mm.
I got decent results using the following settings with the 8.1mm wrench having a 1.5mm spring for SMA connectors: material: PETG perimeters: 3 top- and bottom: 4 layers nozzle: 0.4mm
If you could use another wrench size feel free to contact me.
Descripción original del autor, publicada en MyMiniFactory.
