Toothy Monster Desk Organizer with Stepped Compartments

A one-piece desk caddy with raised eyes on stalks, teeth and claws. Three front compartments hold small stationery while a taller rear pocket keeps pens upright. Dimensions and storage layout can also be adjusted on the model page: https://boxesmodel.com/models/halloween-toothy-monster-desk-caddy Width, depth, height, front compartment count, rear-pocket proportion and wall thickness can be adjusted. The files here are the complete fixed default-size version. Custom exports follow the pricing shown on the model page. DEFAULT SIZE AND ASSEMBLY 180 x 130 x 155 mm overall. Rear centreline clear depth: 43.8 mm; front centreline bay width: 53.6 mm; conservative front usable height: 51.1 mm. Curved ends narrow the pockets. One body; no extra pieces or hardware. Print with the base toward the plate and inspect the eye stalks, teeth and claws for support needs. Dimensions are in millimetres. Each STEP is an alternative CAD format for the matching STL, not an extra piece to print. PRINT STATUS AND COLORS Geometry, dimensions and part completeness were checked in CAD. This model has not been sliced or physically test-printed. Review orientation, supports and tolerances in your slicer. No tested print profile, print time or G-code is supplied. The cover is a render of the actual model, not a photograph. STL and STEP contain uncolored geometry; illustrated colors require painting or slicer coloring. No AMS/MMU-ready multicolor 3MF is included. Food-contact performance has not been validated; use wrapped sweets if storing treats. CREDITS AND LICENSE Created for boxesmodel with AI-assisted parametric CAD development. © 2026 boxesmodel. CC BY-NC-ND 4.0: https://creativecommons.org/licenses/by-nc-nd/4.0/ Personal noncommercial printing is permitted under the license. Credit boxesmodel with source and license links when sharing the original files. Do not distribute modified versions; the linked license contains the full terms.