TJIRC Xray V2 - Twin puller FPV conversion
por Justin Mader en Thingiverse
Updated with removable motor mounts. When printing: mirror nacelle, motor mount, and servo cover for opposite side. Nose cone, motor mounts, and ESC/FC mounts use M2x3x3.5 brass knurls. They're CA glued into the fuse for the nosecone, and hot-pressed into the nacelles and ESC mounts...
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Justin Mader.
Archivos (6)
- Categoría
- Repuestos
- Formatos
- STL
- Descargas
- 189
- Publicado
Sobre este modelo
Updated with removable motor mounts. When printing: mirror nacelle, motor mount, and servo cover for opposite side. Nose cone, motor mounts, and ESC/FC mounts use M2x3x3.5 brass knurls. They're CA glued into the fuse for the nosecone, and hot-pressed into the nacelles and ESC mounts. https://www.youtube.com/watch?v=_32yRch1SSc Airframe can be found here: https://alofthobbies.com https://www.hyperflight.co.uk
Descripción original del autor, publicada en Thingiverse.
