Tiny Screwdriver Handle for 1/4" bits
por Elizabeth Greene en MyMiniFactory
This is a small handle for standard 1/4" screwdriver bits. It's incredibly handy for getting into tiny spaces that are too short for a standard screwdriver.
Licencia
Revisa las condicionesMyMiniFactory - Credit - Remix - Commercial
El autor usa su propia licencia. Revisa sus condiciones en la página original antes de compartir, modificar o vender.
Al descargar aceptas respetar la licencia y dar crédito a Elizabeth Greene.
Archivos (2)
- Categoría
- Herramientas
- Formatos
- STEP, STL
- Descargas
- 869
- Publicado
Sobre este modelo
This is a small handle for standard 1/4" screwdriver bits. It's incredibly handy for getting into tiny spaces that are too short for a standard screwdriver.
This was inspired by 4 Volt's Small Hex Screwdriver Handle. http://www.thingiverse.com/thing:137367 Thanks 4 Volt!
The big change in this vs. 4 volt's model is the smaller size. The total height with a bit installed is 1.1 inches/28mm. Additionally I've added a small through hole so bits can be pushed out using a small pin or nail. The Bit size and clearance are parameterized in the Fusion 360 model if you need to fit a different sized hex bit or want to adjust the clearance for a looser fit.
The example model was printed with a 0.1mm layer height 50% infill in MonoPrice PLA. The part was designed in AutoDesk Fusion 360. .STL, F3D, STEP, and IGES files are attached.
Descripción original del autor, publicada en MyMiniFactory.
