The Turdminator - Ultimate Cat Litter Scoop - Say hasta la vista to cat waste

Your cat made a mess. You sent a machine. Meet The Turdminator, a 3D-printable cat litter scoop with a mission: lift the clumps, sift the loose litter, and say “Hasta la vista, baby” to whatever’s left in the basket. Look closely, and you’ll see the Terminator staring back from the scoop floor. The portrait is built into the sifting pattern using 618 uniform 3.6 mm through-holes. The basket has a tapered scraping lip for getting under clumps, reinforced high sides to help keep them in while you shake, and a ribbed handle with raised THE TURDMINATOR lettering. The basket and handle print flat on one 220 × 220 mm build plate with supports off. Dry-fit the sliding dovetail, then secure it with a little CA glue. PETG print settings I printed mine with 4 walls. For a 0.4 mm nozzle, start with a 0.20 mm layer height, 240°C nozzle temperature, 75°C bed temperature, and 25% gyroid infill. Keep supports off and use your filament maker’s recommended temperatures if they differ. While I take pride in making original things, a bit of AI was used to develop the model, including translating the portrait into a printable sifting pattern. If you print one, post your make and tell me what filament and litter you used. Follow my account for more functional prints with questionable names. As for your cat? “I’ll be back.”