The Landing – Japandi Entryway Organizer Shelf with Key Hooks

A Japandi-inspired wall organizer featuring a rounded fluted backplate, removable curved tray, rear mail pocket, four rounded key pegs and concealed screw mounts. Assembled size: approximately 270 × 116 × 168 mm. Includes two STL parts, a K2 Plus PETG 3MF project, complete ZIP with editable Python source and mesh checks, and print/assembly instructions. Suggested print settings: PETG, 0.4 mm nozzle, 0.20 mm layers, 5 walls, 6 top/bottom layers, 25–30% gyroid infill. Backplate: rear face down with local supports under rail lips and peg-cap shoulders. Tray: underside down, normally without supports. Configure your own printer and filament profiles before slicing. Concealed rear keyholes are 170 mm apart. Use wall-appropriate screws and anchors. Dry-fit the tray; full mounting dimensions and assembly directions are in PRINT-AND-ASSEMBLY.txt. Prototype v3: digitally checked meshes; physical prototype remains untested and no load rating is assigned. Intended for light keys, letters, phone and wallet, not bags or coats. Gallery includes CAD and generated-image design comparison previews. More designs and behind-the-scenes previews: https://www.patreon.com/RCJCreations