The Handsome Cableorganizer
por GiantBrain en Printables
This cable organizer has some improvements and advantages compared to the existing ones. > Updated!!! <
Licencia
Solo uso personalCC BY-NC-ND 4.0 — Atribución, no comercial, sin derivadas
Solo para uso personal, sin modificarlo y dando crédito. No se permite vender ni redistribuir cambios.
Al descargar aceptas respetar la licencia y dar crédito a GiantBrain.
Archivos (9)
- CableOrganizer_V1.1.stl STL · 16,3 MB
- CableOrganizer_V1.1_Cap_Fingerhutch.stl STL · 5,0 MB
- CableOrganizer_V1.1_Cap_Plane.stl STL · 3,8 MB
- CableOrganizer_Mini_V1.3.stl STL · 17,7 MB
- CableOrganizer_Mini_V1.3_Cap_Plane.stl STL · 3,8 MB
- CableOrganizer_Mini_V1.3_Cap_Fingerhutch.stl STL · 5,0 MB
- CableOrganizer_Mini_NoBridge_V1.1.stl STL · 13,2 MB
- CableOrganizer_V1.1_0.3mm_PLA_MK3S_4h39m.gcode GCODE · 11,3 MB
- CableOrganizer_V1.1_0.2mm_PLA_MK3S_7h30m.gcode GCODE · 15,7 MB
- Categoría
- Organización
- Formatos
- STL, GCODE
- Descargas
- 8,160
- Publicado
Sobre este modelo
You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗
This Cable Organizer has some improvements and advantages compared to the existing ones. Big Version (90mm) for up to 2m Cables the regular Mini Version (63mm) is for USB-C Only up to 1m Cable. UPDATES 28.01.22 > Added New Caps Designs (Plane and Fingerhutch) 31.02.22 > Added the Mini Version and New Caps (Plane and Fingerhutch) and I added a Mini Version with no Bridge to get in other Cables with bigger Plug 04.03.22 > New Mini version 1.3 with improved tolerances added. That some makers had reported problems.
The Design - The cables are better protected against cable breakage due to excessive bending during winding - Winding and unwinding is much easier due to a larger spool plate. - Nice and handsome 😎 - Attention was paid to easy printability without support material.
Print instructions Simple print! No support needed! 10% Gyroid infill is sufficient! PLA and PETG gives a very good results on 0.3mm for the Mini you need at least 0.2mm of course with original Prusament! ;-) Happy Printing!!!
Descripción original del autor, publicada en Printables.
