Test 1st Layer Challenge
por escuelamakers360 en Cults3D
Hello maker!
Cults3D entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalLicencia de uso privado de Cults3D: puedes imprimirlo para ti. No se permite compartir el archivo ni vender las impresiones.
Al descargar aceptas respetar la licencia y dar crédito a escuelamakers360.
Archivos (6)
- 0.08mm.stl STL
- 0.12mm.stl STL
- 0.24mm.stl STL
- 0.28mm.stl STL
- 0.2mm.stl STL
- 0.32mm.stl STL
- Categoría
- Para tu impresora
- Formatos
- STL
- Descargas
- 4,500
- Publicado
Sobre este modelo
Hello maker!
In episode #2 of my YouTube channel
| https://youtu.be/Thq7sp5Ruv0 (publish date 03/04/2024 19:00)| I challenge you to print a perfect first layer. If you want to check if your hot bed is level this model is a quick print test will show you if it is.
The first layer is super important, as it is the one that guarantees a good adhesion of your models to the printing platform. If this is not well glued you run the risk of it peeling off halfway through printing.
Run this test, share your results with me and let me know if you have seen any significant changes.
This test will also tell you if you have misadjusted Pressure advance/ Linear advance, over or under flow, low temperature among others.
For more info comment me on the video!
Descripción original del autor, publicada en Cults3D.
