Tentacle Lamp | Six Octopus Arms Around a Glowing Dome | 3D Printable
Six octopus tentacles with real sucker cups curl around a glowing dome. Drop in an LED light and the arms glow. Prints without supports.
Cults3D entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalLicencia de uso privado de Cults3D: puedes imprimirlo para ti. No se permite compartir el archivo ni vender las impresiones.
Al descargar aceptas respetar la licencia y dar crédito a such3dart.
Archivos (6)
- README.txt TXT
- Tentacle_Lamp.blend BLEND
- Tentacle_Lamp_Base.stl STL
- Tentacle_Lamp_Dome.stl STL
- Tentacle_Lamp_Tentacle_x1.stl STL
- Tentacle_Lamp_Tentacles_x6_Plate.stl STL
- Categoría
- Hogar
- Formatos
- TXT, BLEND, STL
- Descargas
- 1
- Publicado
Sobre este modelo
Six octopus tentacles with real sucker cups curl around a glowing dome. Drop in an LED light and the arms glow. Prints without supports.
TENTACLE LAMP: six octopus tentacles rise around a glowing diffuser dome. Each arm has 15 real sucker cups in two staggered rows, from about 10 mm wide at the base to about 3.7 mm near the tip. The arms curve in around the dome and flick out at the tips.
INCLUDED
Base STL (LED pocket, 6 sockets, cable slot)
Dome STL (hollow diffuser)
Tentacle STL (print 6) and a plate STL with all six tentacles
Editable Blender file (.blend)
README with print settings
SIZES: about 120 mm wide x 108 mm tall. Tentacle 26 x 26 x 106 mm, base 120 x 120 x 16 mm, dome 57 x 57 x 69 mm. Your printer needs about 110 mm of build height.
LIGHT SOURCE: use a flameless LED only (an LED tealight up to 40 mm wide, or a small USB LED puck, not included). Never use a bulb or a real candle: PLA softens at about 60 °C. This is a shell around a small LED, not a mains-powered lamp.
Descripción original del autor, publicada en Cults3D.
