Tatra K5AR H0 FREE MODEL
The Tatra K5AR was an articulated tram built by Czechoslovakia’s ČKD between 1970 and 1973 specifically for Cairo, Egypt. Based on the K2 design but adapted for extreme heat, 200 of these bi-directional units were delivered to handle the city's heavy suburban traffic. However, due to the harsh deser
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalSin licencia indicada
El autor no indicó una licencia: todos los derechos le pertenecen. Úsalo solo para imprimir en casa y consulta al autor para cualquier otro uso.
Al descargar aceptas respetar la licencia y dar crédito a Martin M.
Archivos (13)
- Tatra_K5AR_H0_cabin-wall.stl STL · 1,8 MB
- Tatra_K5AR_H0_coupler-bar.stl STL · 178 KB
- Tatra_K5AR_H0_seats_lever.stl STL · 3,1 MB
- Tatra_K5AR_H0_seats_lever_mirrored.stl STL · 3,1 MB
- Tatra_K5AR_H0_chassis_static_front.stl STL · 4,4 MB
- Tatra_K5AR_H0_chassis_static_rear.stl STL · 4,5 MB
- Tatra_K5AR_H0_chassis_Halling_front.stl STL · 4,4 MB
- Tatra_K5AR_H0_chassis_static_mid.stl STL · 6,0 MB
- Tatra_K5AR_H0_body_mid_Halling.stl STL · 6,5 MB
- Tatra_K5AR_H0_body-rear_windows-out.stl STL · 28,1 MB
- Tatra_K5AR_H0_body-front_windows-in.stl STL · 25,0 MB
- Tatra_K5AR_H0_body-rear_windows-in.stl STL · 25,0 MB
- Tatra_K5AR_H0_body-front_windows-out.stl STL · 28,2 MB
- Categoría
- Miniaturas
- Formatos
- STL
- Descargas
- 2
- Publicado
Sobre este modelo
The Tatra K5AR was an articulated tram built by Czechoslovakia’s ČKD between 1970 and 1973 specifically for Cairo, Egypt. Based on the K2 design but adapted for extreme heat, 200 of these bi-directional units were delivered to handle the city's heavy suburban traffic. However, due to the harsh desert environment and insufficient maintenance, the fleet deteriorated rapidly and was entirely withdrawn from service by the early 1980s.
3D data content of Tatra K5AR in H0 scale: - K5AR body (2 parts, windows in/out version) - mid part fitting Halling Jacobs bogie - articulated chassis for Halling bogies - seats on lever (above Halling bogies cutouts) - chassis for static model - cabin wall - coupler bar
Motorized Halling bogies ANT-ALX-210-H0 (or H0m for narrow gauge tram) together with cover ETH-DGB-210 should be used. https://shop.ferro-train.com/HallingShop/Article/ANT-ALX-210-H0 https://shop.ferro-train.com/HallingShop/Article/ETH-DGB-210
Non-motorized Halling bogie is ETH-MDG-E-100-H0 / ETH-MDG-EK-100-H0 (or H0m) https://shop.ferro-train.com/HallingShop/Article/ETH-MDG-E-100-H0 https://shop.ferro-train.com/HallingShop/Article/ETH-MDG-EK-100-H0
Middle bogie is Halling ETH-JDG-GT6 https://shop.ferro-train.com/hallingShop/Article/ETH-JDG-GT6
Passenger seats, couplers and masks for Halling bogies are available on my profile page for free.
Descripción original del autor, publicada en Thangs.
