Tails - Classic
por Steve Solomon en MyMiniFactory
Tails, a character from Sega's Sonic the Hedgehog series.
MyMiniFactory entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Steve Solomon.
Archivos (45)
- Arm Left.stl STL
- Arm Right.stl STL
- Base Back.stl STL
- Base Bottom.stl STL
- Base Dk Brown.stl STL
- Base Green.stl STL
- Base Lt Brown.stl STL
- Base Side Dk Brown.stl STL
- Base Side Lt Brown.stl STL
- Base Sides.stl STL
- belly.stl STL
- body.stl STL
- buckles.stl STL
- Cuff Black Left.stl STL
- Cuff Black Right.stl STL
- Cuff White Left.stl STL
- Cuff White Right.stl STL
- Ear Left.stl STL
- Ear Right.stl STL
- Eye Black Left.stl STL
- Eye Black Right.stl STL
- Eye White Dots.stl STL
- Eye White Left.stl STL
- Eye White Right.stl STL
- hair.stl STL
- Hand Left.stl STL
- Hand Right.stl STL
- head.stl STL
- mouth.stl STL
- nose.stl STL
- Shoes Red Left.stl STL
- Shoes Red Right.stl STL
- Shoes White Left.stl STL
- Shoes White Right.stl STL
- Socks Blue Left.stl STL
- Socks Blue Right.stl STL
- Socks White Left.stl STL
- Socks White Right.stl STL
- Sole Left.stl STL
- Sole Right With Pin.stl STL
- Sole Right.stl STL
- Tail Left Orange.stl STL
- Tail Right Orange.stl STL
- Tail White Left.stl STL
- Tail White Right.stl STL
- Categoría
- Varios
- Formatos
- STL
- Descargas
- 378
- Publicado
Sobre este modelo
Tails, a character from Sega's Sonic the Hedgehog series.
Tails is a kickname for "Miles Prower", which is a pun on "miles per hour", a reference to the famed speed of Sonic the Hedgehog. Tails is a two-tailed fox, hence the nickname.
He is a mechanical genius and skilled pilot. He can fly by spinning his tails like a helicopter rotor and can be seen flying in multiple games and TV shows.
Two parts require supports and special printing considerations (see notes for very specific and important information). Slicer supports are minimal for the two parts, therefore, no presupported files are included for this model.
If you have the proper filament colors, no painting is needed.
As presented, Tails is in proportion to my previous Sonic model.
Tails can be printed without the base if you want to hang him from a shelf in order to 'fly solo', or printed with the base and one connecting part.
The assembled model with the base is 205mm tall.
(11/11/2023 note: The mouth.stl part is incorrectly labelled as ‘face’ in the assembly diagram.)
Enjoy!
...........................................................................................................
Special shoutout to maker Benoît Lussier for providing QA printing and quality feedback.
...........................................................................................................
**Print Instructions:** Supports: Yes (two parts only) Resolution: .2mm (see below for printing tips suggested optional exceptions) Infill: 15%
Notes:**
Refer to the notes below for a few important printing and assembly instructions.
...........................................................................................................
**Building the model**
Colors
Black: (Paramount3D PLA - Black) eye_black_right eye_black_left nose base_bottom base_back base_sides (contains two parts) sole_right (to be used if printing without the base) sole_right_with_pin (to be used if printing with the base) sole_left cuff_black_right cuff_black_left ..
Orange/Yellow: (Paramount3D PLA - Eggyolk Yellow) head hair arm_left arm_right tail_orange_left tail_orange_right body ..
Green: (DevilDesigns - Light Green) base_green ..
Blue: (Parmount3d PLA - Cadet Blue) socks_blue_right socks_blue_left ..
Red: (3DFuel PLA - Iron Red) shoes_red_left shoes_red_right ..
White: (Overture PLA - White) eye_white_dots (contains two identical pieces) eye_white_right eye_white_left hand_right hand_left ear_right ear_left shoes_white_right shoes_white_left socks_white_right socks_white_left cuff_white_right cuff_white_left belly face tail_white_right tail_white_left ..
Grey: (Paramount3d PLA - Prototype Grey) buckles (contains two identical pieces) ..
Light Brown: (PolyTerra PLA - Wood Brown) base_lt_brown (contains all the individual parts needed) base_side_lt_brown (contains four identical pieces) ..
Dark Brown: (PolyTerra PLA - Army Brown) base_dk_brown (contains all the individual parts needed) base_side_dk_brown (contains two identical pieces)
...........................................................................................................
**Printing and assembly tips**
Descripción original del autor, publicada en MyMiniFactory.
