T_Joint_20mm_8mm_CarbonFiber
Connect CF tubes together. M3 machine screws. PETG-CF.
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Isaac N.
Archivos (1)
- TJoint_20mm_8mm.stl STL · 1,6 MB
- Categoría
- Repuestos
- Formatos
- STL
- Descargas
- 0
- Publicado
Sobre este modelo
Connect CF tubes together. M3 machine screws. PETG-CF.
Print settings tips: { "bottom_surface_pattern": "monotonicline", "brim_type": "outer_only", "enable_support": "1", "from": "User", "inherits": "0.20mm Standard @BBL X1C", "layer_height": "0.12", "name": "Part PROD - 0.20mm Standard @BBL X1C", "outer_wall_speed": [ "60", "nil" ], "overhang_2_4_speed": [ "30", "nil" ], "prime_tower_infill_gap": "100%", "prime_tower_rib_wall": "0", "print_extruder_id": [ "1", "1" ], "print_extruder_variant": [ "Direct Drive Standard", "Direct Drive High Flow" ], "print_settings_id": "Part PROD - 0.20mm Standard @BBL X1C", "sparse_infill_pattern": "gyroid", "support_on_build_plate_only": "1", "support_top_z_distance": "0.25", "support_type": "tree(manual)", "version": "2.2.0.3", "wall_generator": "arachne", "wall_loops": "99" }
Attribution: NikosSprocket
https://www.printables.com/model/453836-x500-quad-drone-lower-leg-connector
Descripción original del autor, publicada en Thangs.
