T-28 Trojan (Hobbyking Durafly 1.1m) motor mount and retract pivot

Some parts I've drawn and printed to keep my Hobbyking T-28 flying. Motor mount comes in 2 versions - one to screw to a flat replacement bulkhead (like a plywood replacement if you cut the damaged nose off) but id the front is salvageable or the plastic insert is simply broken, the motor bulkhead body is a direct drop in replacement for the original part. Both come with down (3°) and right (1.5°) thrust angle, which pretty much matches the original (flies OK too) Nosegear piece is to replace the broken bit in the retracts (I bought some replacement ones, but not sure if they are the plastic version that breaks, or the original ones are metal... either way, this bit does work (i had to adjust a bit after printing and fettling the previous model, but this one should be a direct replacement. Needs centre hole at least cleaning out with 3mm drill (where the actual nosegear is inserted) and recommend clean the pivot pins to make smooth action in the retract housing.