Switch2 Docking Station Stand - Inspired by Donkey Kong - Fan Art

Hi guys, here comes my brand new Switch Docking Station Stand for your SWITCH2 - Inspired by Donkey Kong from Nintendo! Allert! Retro vibes are coming if you download this awesome file! The Gorilla is holding your brand new Switch2 until you start to game! The Push Button Mechanism is next high level setup for your 3d printing model! Read description and check the model images to get that push button mechanism! Setup your Switch 2 to the next level! :)

_SETTINGS:_ - printer: BambuLab A1 - NO supports! - 2 Wall Lines - Nozzle: 0,4 mm - Infill: 10% - 15% - Infill Pattern: I always recommend Gyorid (as an Engineer I know that the Gyroid Pattern is always the best choice because of its efficiency) - material: OVERTURE Matte Brown PLA (Amazon), OVERTURE Matte Light Brown PLA (Amazon), OVERTURE Matte Black PLA (Amazon), OVERTURE Matte Yellow PLA (Amazon), OVERTURE Matte Yellow PLA (Amazon) :) - If you have any questions about printing, feel free to contact me on Discord or just on Thangs. - I recommend to put some glue on the print bed to get an 100% print after all! - IMPORTANT! To install the Push Button mechanism - you need to buy two compression springs on Amazon - the details to the compression springs are (length 35mm; diameter 9mm; strength 0,9mm). - BUT of course there is a normal model version without the push button mechanism :)

_IMPORTANT_ - This model can be used for private use and for a commercial use. If you want more, feel free to purchase my EPIC plan. Start with the Starter Plan and get one model for free! - This is a hand made project - and not an official Nintendo product!