SW Republic Commando Helmet Split Print Ready

It has been bought to my attention the helmet was done by Dan Inskip over at the MiniFactory. For those of you wanting to print the helmet complete on say a CR10.

head on over to the link below and give thanks to Dan for his great work.

https://www.myminifactory.com/object/3d-print-star-wars-republic-commando-helmet-25728

As a request from Fabian. I have split this awesome helmet up ready to print as best I could.

This is an excellent model and all credit should go to Dan Inskip. I think it is well worth Printing. Ive sized the individual parts to suit a 300 x 300 bed CR-10 or simular model. I've also included 1 file with the helmet split in half again for reference and or to be used with a 200 x 200 bed, The files just need seperating further.There is some awesome detail here and a big thanks to Dan the original modler for sharing this model, Cheers Jace

Do double check the sizing suits your needs, you can head on over to the mini factory to get the original helmet file. that way you can apply a % increase to the parts based on increase or decreased changes made to the original model.

I found that (using Cura), 6.23% scale was near a perfect overlay of the model this was remixed from.