Sunflower using Hueforge
por lostintech en Printables
This is made using one of my own macro photos of a sunflower. Made into a 3d print using Hueforge.
Licencia
Solo uso personalCC BY-NC 4.0 — Atribución, no comercial
Puedes imprimirlo y modificarlo para uso personal dando crédito. No se permite vender las impresiones.
Al descargar aceptas respetar la licencia y dar crédito a lostintech.
- Categoría
- Figuras y arte
- Formatos
- STL, TXT
- Descargas
- 826
- Publicado
Sobre este modelo
If you have no idea what Hueforge is look here You need something like black, then brown, then yellow, then white for this. I used a sort of dark red as the 2nd colour, worked ok. I used bambu studio and an X1C/AMS but you can use anything and change manually at the layers below. Layer height: 0.08 First layer height: 0.16 Swap Instructions: Black until layer #4 at 0.4mms brown until layer #8 at 0.72mms yellow until layer #29 at 2.4mms White until layer #58 at 4.72mms
Descripción original del autor, publicada en Printables.
