Stormbreaker (3D Printable)
Make It 3D Printable!! Thor's Stormbreaker needs no introduction. It's the focus of our epic two-part build series: Building Stormbreaker: Part 1 (https://www.youtube.com/watch?v=HxX75eYf598) and BRING ME THANOS! Building Stormbreaker: Part 2 (https://www.youtube.com/watch?v=449lCaylrIo). Enjoy it n
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Revisa las condicionesMember Licensing Agreement for Hacksmith Memberships
El autor usa su propia licencia. Revisa sus condiciones en la página original antes de compartir, modificar o vender.
Al descargar aceptas respetar la licencia y dar crédito a Hacksmith.
Archivos (34)
- ~$3D Print Assembly.SLDASM SLDASM · 1 KB
- Climbers1.STL STL · 3,3 MB
- Climbers2.STL STL · 2,7 MB
- handle segment5.STL STL · 596 KB
- handle segment4.STL STL · 462 KB
- handle segment6.STL STL · 623 KB
- handle segment7.STL STL · 3,5 MB
- handle segment3.STL STL · 442 KB
- handle segment2.STL STL · 539 KB
- handle segment1.STL STL · 3,0 MB
- Square Pin (18 nos.).STL STL · 1 KB
- Plus Pin (6 nos.).STL STL · 50 KB
- Block Pin (2 nos.).STL STL · 1 KB
- Hammer Pin.STL STL · 137 KB
- Round pin (4 nos.).STL STL · 13 KB
- Mid Segment.STL STL · 118 KB
- Hammer Segment 4.1.STL STL · 14 KB
- Axe Segment 4.1.STL STL · 47 KB
- Mid Segment Cap.STL STL · 58 KB
- Hammer Segment 4.2.STL STL · 14 KB
- Axe Segment 7.STL STL · 35 KB
- Axe Segment 6.STL STL · 71 KB
- Hammer Segment 5.2.STL STL · 220 KB
- Axe Segment 5.STL STL · 77 KB
- Hammer Segment 5.1.STL STL · 220 KB
- Hammer Segment 6 (2 nos.).STL STL · 1 KB
- Hammer Segment 2.1.STL STL · 11 KB
- Hammer Segment 2.2.STL STL · 10 KB
- Axe Segment 1.STL STL · 8 KB
- Axe Segment 2.STL STL · 14 KB
- Axe Segment 3.STL STL · 26 KB
- Hammer Segment 1.STL STL · 52 KB
- Hammer Segment 3.STL STL · 54 KB
- stormbreaker 1.mp4 MP4
- Categoría
- Cosplay y props
- Formatos
- SLDASM, STL, MP4
- Descargas
- 2,106
- Publicado
Sobre este modelo
Make It 3D Printable!! Thor's Stormbreaker needs no introduction. It's the focus of our epic two-part build series: Building Stormbreaker: Part 1 (https://www.youtube.com/watch?v=HxX75eYf598) and BRING ME THANOS! Building Stormbreaker: Part 2 (https://www.youtube.com/watch?v=449lCaylrIo). Enjoy it now, reimagined as a fully built and tested FDM print!
Print Instructions - Print handle parts with higher wall loops (more than 5) with infill 25% - Print the axe with less strength, with 4 wall loops. 5% to 10% infill. - Print all connecting pins with higher strength. More wall loops or 100% inill
Features - Modular Parts for painting or electroplating 😎
Attachments: - STL Files - CAD Assembly - Assembly video explainer
Filament Needed: - Dark Grey: 1375g - Light Grey: 2825g - Brown: 2000g - Cyan: 430g - Total: 6.630 kg
Descripción original del autor, publicada en Thangs.
