Stand for turning a bicycle

Remix: https://www.printables.com/model/1385858-stojanek-pro-umisteni-kola-na-riditka-samosvorne-b/ by author Kalimero - Jan Fiala A practical stand for turning a bicycle or e-bike upside down onto the handlebars. The stand simply attaches to the ends of the handlebars and allows the bike to be safely flipped over. It keeps the handlebars off the ground and helps prevent unwanted pressure or damage to handlebar-mounted components such as controls, displays, brake levers and other e-bike controls. I have tested the stand with a Canyon Spectral:ON e-bike weighing approximately 25 kg. When fitting the stand onto the handlebar grips, gently squeeze the ends of the stand together. This opens the mount by approximately 1 mm, making it easier to fit onto the handlebars. ⚠ Warning: Do not squeeze the mount too hard. Excessive force may cause the mount to crack or break. After fitting, make sure the stand is securely attached to both ends of the handlebars before turning the bicycle upside down. Recommended print settings Material: PETG / PETG-CF Layer: 0.2 mm Wall count: 7 Top layers: 5 Bottom layers: 5 Infill: Gyroid Wall speed: 100 mm/s Adjust the print settings according to your material and printer. Always inspect the printed parts for defects and verify their strength before use.