Stackable Shelf Organizer - Drawer System

Definitely my favorite addition to the Stackable Shelf Organizer so far! This is a drawer organizer in various sizes that is fully compatible with the parent design and simply drops into one of the shelves. You can use the organizer with or without the drawers, depending on what you're storing. Following the theme of this series, the Drawer System does not require any supports, making it easy and straightforward to print. If you don't already have a shelf printed, you can find the Stackable Shelf Organizer here: https://www.printables.com/model/970400-stackable-shelf-organizer

Print Settings: - All files should be printed in the provided orientation without support. - 0.24mm layer height - 3 perimeters for solid walls - Infill: use 0% infill and 5 top and bottom layers for a cleaner print on the pull handles. This keeps your nozzle from traveling quickly to print separate infill and possibly snagging a wall. - A brim may be needed to prevent warping. - The inner walls are thin to conserve filament, so if your slicer has an Arachne wall generator I recommend using it.

To install the drawer housing, first set it into the legs of the shelf with the underside facing you. Then, push the bottom legs of the shelf outward slightly to slide the housing into place: