Spool Shelf Storage

Do you have leaning towers of filament in your workspace? Put it on the wall! Here's everything you need! - Check that your wall studs are 16" apart and mark them - Print a full set of brackets (4 pieces) or as many as you like- (1) end cap left, (2) middle supports, (1) end cap right - Print at .2mm layer height, 3 walls, 10% gyroid (or beefy 30% triangle)

- Grab (8) #8x1.5" screws, preferably button head - Pickup (2) 1"x48" dowel rods

Fasten the brackets to the wall ~16" apart and insert dowel rods. We find it easier to use a level and fasten the endcaps first and the supports second. Build video: https://www.tiktok.com/@overture_3d/video/7301001493333708075 *Disclaimer: Print and test at your own risk. Fully loaded with ~40lbs of filament, each bracket will sustain 10lbs. Ensure that your studs, fasteners, and print settings are appropriate before loading. Happy Printing! - Greg and Overture Team