Spinning Christmas Tree Ornament Multicolor & SingleColor

Available in two optimized variants: 1. AMS Multi-Color Profile: Prints in one single pass directly on the plate – ready to hang right off the bed. 2. Single-Color Multi-Part Profile: Prints flat in separate parts for quick color mixing on standard single-extruder setups and snaps together easily. Key Features & Specs - Spinning Pivot Effect: Smooth 360° rotation inside the outer frame. - 100% Support-Free: Tuned clearances for clean, overhang-free printing. - A1 mini Compatible: Easily fits the 180×180 mm build plate. - Two Print Modes: All-in-one AMS print or tool-free snap-fit single color assembly. - Zero Hardware Required: Fully 3D printed mechanical pivot (no screws, pins, or glue needed). Recommended Print Settings (Bambu Studio) - Build Plate: Textured PEI Plate (ideal surface finish for front face) - Layer Height: 0.16 mm (recommended for crisp text and snowflake edges) or 0.20 mm standard - Walls / Perimeters: 3 - Top / Bottom Shells: 4 top, 4 bottom - Infill: 15% Gyroid - Supports: Disabled (Not needed) - Brim: Disabled (ensure bed is properly cleaned and degreased) Assembly & Print Variants Variant A: Multi-Color AMS (.3MF) - Prints fully assembled in place on a single plate. - Once the plate cools down, gently pop the ornament off and give the center disc a light spin to free the pivot. No assembly required. Variant B: Single-Color Multi-Part (.3MF) 1. Let the build plate cool down completely before removing parts to prevent bending the outer ring. 2. Carefully flex the outer red ring slightly outward. 3. Snap the pivot pins of the inner tree element into the alignment sockets on the outer frame. 4. Ensure the "Merry Christmas" text faces forward and spins freely.