Sony ActionCam tripod mount (as100V) (various versions)
por aarod en MyMiniFactory
The original part cost 48 dollars and it is very hard to find. This is a life saver if you own one of these cameras.
Licencia
Solo uso personalMyMiniFactory - Credit - Remix - Noncommercial
Licencia de MyMiniFactory: puedes imprimirlo y remezclarlo dando crédito, sin fines comerciales.
Al descargar aceptas respetar la licencia y dar crédito a aarod.
Archivos (5)
- Sony Actioncam Tripod Mount As100V Nut Hole And Washer Hole More Clearance Version 2.Stl STL
- Sony Actioncam Tripod Mount As100V With Thread And With Washer And More Clearance Version2.Stl STL
- Sony Actioncam Tripod Mount As100V With Washer.stl STL
- Sony Actioncam Tripod Mount As100V.stl STL
- Sony Actioncam Tripod Mount With Thread As100V.stl STL
- Categoría
- Tecnología
- Formatos
- STL
- Descargas
- 123
- Publicado
Sobre este modelo
The original part cost 48 dollars and it is very hard to find. This is a life saver if you own one of these cameras.
There are two designs: one with the tread into the plastic and one with a hole for a nut. I have only printed the one with the thread build it and it is holding study.
For he screw to the Camera I used a m4 * 8. And to keep it in place I got a e-clip 3/16 from home depot (see pictures).
Next revision I might build a whole for the e-clip so the camera sits completely flat on the base .
UPDATE: Created version 2.0 with a hole for the e-clip or washer and also more room for the M4 screw that attaches the camera to the base. Why?I am now going to use M4x8mm Thread Carbon Steel Knurled Round Head screws.
Descripción original del autor, publicada en MyMiniFactory.
