Soldering Iron Press for Threaded Inserts
This is model of soldering iron press for threaded inserts.
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalSin licencia indicada
El autor no indicó una licencia: todos los derechos le pertenecen. Úsalo solo para imprimir en casa y consulta al autor para cualquier otro uso.
Al descargar aceptas respetar la licencia y dar crédito a DGA.
Archivos (8)
- 1197-000-1-Base.stl STL · 204 KB
- 1197-000-3-Slider.stl STL · 220 KB
- 1197-000-4-Bearing Cover.stl STL · 91 KB
- 1197-000-5-Clamp.stl STL · 197 KB
- 1197-000-6-End Cap.stl STL · 135 KB
- 1197-000-7-C-Clamp.stl STL · 80 KB
- 1197-000-8-Handle.stl STL · 70 KB
- 1197-000-9-Link.stl STL · 57 KB
- Categoría
- Herramientas
- Formatos
- STL
- Descargas
- 163
- Publicado
Sobre este modelo
This is model of soldering iron press for threaded inserts. For this stand I used an old 2 pc 8x370mm rods from my printer( rods have groves so were useless in 3d printer) and 2x LMU08 bearings. Parts were printed in Bambu Lab PET-G Basic Blue filament.
Threads M4 in base and end cap was tapped in the material. In slider I used a M4 threaded inserts. Tap is to long to make the thread inside this hole.
Used items: 8x370mm steel rods from printer-2pc LMU08 berings -2pc Tension spring 30mm long- 2pc
Fasteners used: Screws: M3x25mm Socket Head Screw- 2pc M4x8mm Socket Head Screw- 6pc M4x25mm Socket Head Screw- 2pc Nuts: M3 Nylock Nut- 2pc M4 Nylock Nut- 5pc Washers: M3 washer- 4pc M4 washer- 8pc Inserts: M4x8mm threaded insterts- 2pc
Material: PLA, PET-G, ABS, etc.
Layer High: 0,3 or lower ( 0,2 will be good)
Support needed under rib in slider.
Descripción original del autor, publicada en Thangs.
