Socket Trays
por Handsome Harold en Thingiverse
Modeled my own trays based on the original design for the 1/4" sockets. I sized them to fit perfectly in the drawers together of a 27x18" tool chest drawer, but could obviously be used in any drawer. The corners are also cut on the larger trays to allow them to all fit on the build plate of an X1C..
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Handsome Harold.
Archivos (22)
- 38_Drive_Spark_Plug.stl STL · 760 KB
- 38_Drive_Torx_Bits.stl STL · 5,5 MB
- 38_Drive_Metric_Hex.stl STL · 3,5 MB
- 38_Drive_SAE_Hex.stl STL · 3,8 MB
- 14_Drive_Bit_Sockets.stl STL · 7,1 MB
- Metric_1_2_Drive_Shallow_12_Point.stl STL · 2,1 MB
- Metric_1_2_Drive_Shallow.stl STL · 6,2 MB
- Metric_1_2_Drive_Deep.stl STL · 6,8 MB
- Metric_3_8_Drive_Shallow.stl STL · 7,2 MB
- Metric_3_8_Drive_Deep.stl STL · 9,7 MB
- SAE_12_Drive_Shallow_12_POINT.stl STL · 2,1 MB
- SAE_1_2_Drive_Shallow.stl STL · 6,0 MB
- SAE_1_2_Drive_Deep.stl STL · 6,7 MB
- SAE_3_8_Drive_Shallow.stl STL · 8,3 MB
- SAE_3_8_Drive_Deep.stl STL · 7,7 MB
- 8_Drive_Spark_Plug_Sockets.stl STL · 1,6 MB
- 8_Drive_Oil_Filter_Sockets.stl STL · 3,1 MB
- 12_Drive_Non_Marring_Impact_Sockets.stl STL · 3,6 MB
- 14_SAE_Deep.stl STL · 1012 KB
- 14_SAE_Shallow.stl STL · 1,2 MB
- 12_Metric_Impact_Sockets.stl STL · 3,9 MB
- 8_Drive_Extraction_Sockets.stl STL · 2,9 MB
- Categoría
- Herramientas
- Formatos
- STL
- Descargas
- 4,785
- Publicado
Sobre este modelo
Modeled my own trays based on the original design for the 1/4" sockets. I sized them to fit perfectly in the drawers together of a 27x18" tool chest drawer, but could obviously be used in any drawer. The corners are also cut on the larger trays to allow them to all fit on the build plate of an X1C (256x256mm) in 1 piece. Printed with a filament change to easily highlight labels and to give me a method for color coding. the sockets are a "master set" of Maximum sockets from Canadian Tire, and the spark plug extension sockets are "Mixpower" from Amazon. If you make these trays for yourself, id love to see you post a make!
Descripción original del autor, publicada en Thingiverse.
