Small stuff organizer - fasteners, etc (small)
por Jakub Hevera en Thingiverse
Small stuff organizer Designed for fasteners with easy lock and optional drawers for your needs. Items inside box can't mix together when the box is closed. Assembly Every box is made from body, lid, two drawers and one top drawer. - Use 2x M2.5x18 screws to connect lid with body, best are socket...
Licencia
Solo uso personalCC BY-NC 4.0 — Atribución, no comercial
Puedes imprimirlo y modificarlo para uso personal dando crédito. No se permite vender las impresiones.
Al descargar aceptas respetar la licencia y dar crédito a Jakub Hevera.
Archivos (32)
- Box.stl STL · 436 KB
- Box_only_top_drawer.stl STL · 455 KB
- Lid_2.4_empty.stl STL · 514 KB
- Lid_2.5_empty.stl STL · 507 KB
- Lid_2.4_M2.stl STL · 538 KB
- Lid_2.5_M2.stl STL · 531 KB
- Lid_2.4_M2.5.stl STL · 569 KB
- Lid_2.5_M2.5.stl STL · 562 KB
- Lid_2.4_M3.stl STL · 551 KB
- Lid_2.5_M3.stl STL · 544 KB
- Lid_2.4_M4.stl STL · 520 KB
- Lid_2.5_M4.stl STL · 513 KB
- Lid_2.4_M5.stl STL · 539 KB
- Lid_2.5_M5.stl STL · 532 KB
- Lid_2.4_M6.stl STL · 550 KB
- Lid_2.5_M6.stl STL · 543 KB
- Lid_2.4_Nuts.stl STL · 569 KB
- Lid_2.5_Nuts.stl STL · 562 KB
- Lid_2.4_PC.stl STL · 552 KB
- Lid_2.5_PC.stl STL · 545 KB
- Lid_2.4_Logo.stl STL · 518 KB
- Lid_2.5_Logo.stl STL · 511 KB
- Top_drawer_1.stl STL · 31 KB
- Top_drawer_2.stl STL · 231 KB
- Top_drawer_3.stl STL · 256 KB
- Drawer_deep_2.stl STL · 273 KB
- Drawer_2_v2.stl STL · 138 KB
- Drawer_2.stl STL · 265 KB
- Drawer_3.stl STL · 282 KB
- Drawer_4.stl STL · 141 KB
- Drawer_4_v2.stl STL · 290 KB
- Drawer_6.stl STL · 324 KB
- Categoría
- Herramientas
- Formatos
- STL
- Descargas
- 25,609
- Publicado
Sobre este modelo
Small stuff organizer Designed for fasteners with easy lock and optional drawers for your needs. Items inside box can't mix together when the box is closed. Assembly Every box is made from body, lid, two drawers and one top drawer.
- Use 2x M2.5x18 screws to connect lid with body, best are socket head screws. - Designed to be printed from PLA, but if you have problem with lid clip durability, use PETG. It is easy print without supports. - Use Lid xxx - 2,5. It is default lid with holes for M2,5 screws. - If screws are loose and can't cut thread into the lid, use Lid xxx 2,4. It has smaller holes for the screws.
Like this design? Check this! - Battery box AA/AAA - Small parts/fasteners organizer box
Descripción original del autor, publicada en Thingiverse.
