SLEEPY BEAR — Christmas Keepsake Box

A little hug. A little surprise.

SLEEPY BEAR is a seated polar bear keepsake box with sleepy eyes, rosy paws, a red scarf and a golden star held between its arms. Lift off the entire head to reveal a small hidden compartment. The scarf features two rows of shallow recessed V stitches.

BLANK PERSONALIZATION AREA The star is intentionally blank. Add your own lettering in your modeling software; automatic personalization is not included. The usable center is approximately 34 × 13 mm. The star is part of the body, not a removable tag.

INCLUDED • Two native Bambu Studio 3MF projects: five-color reference version and four-color ivory-star alternative. • Aligned color-region STLs and two single-color alternatives: Body-MONO and Head-MONO. • Two final physical pieces: body and removable head. Both are arranged on ONE plate. Decorative color regions are integrated, not loose parts to glue.

SIZE Closed: approximately 5.23 in wide × 3.84 in deep × 7.24 in high. Model dimensions: 132.81 × 97.42 × 184 mm. Production file units remain millimeters. The oval opening is approximately 2.91 × 1.97 in (74 × 50 mm). Suitable for a tiny folded note or small trinket. Do not assume a standard gift card will fit through the opening.

PRINTING Reference setup: Bambu Lab X2D, 0.4 mm nozzle, PLA, 0.20 mm layers, four walls, 15% infill. Both pieces use automatic TREE supports. Open the 3MF as a project, match your printer and filament slots, and re-slice. The reference palette uses five colors: ivory, red, blush, cocoa and honey gold. A single four-slot AMS cannot supply all five at once; use suitable capacity, the four-color ivory-star project, or print in one color and paint. Reference slicer estimates: five colors about 40.0 hours / 922 g including support and purge; four colors about 28.6 hours / 698 g including support and purge