Simple Slide Lock
por Mason en Thingiverse
Custom fidlock type mechanism for only allowing parts to slide in and out one way. Files included are: 3 versions of the sliding part, one with a small base, one with a larger base, and one with a sewable base. There are also 4 versions of the holding mechanism, a basic version, larger edge version.
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Mason.
Archivos (8)
- Fidlock_Holder.stl STL · 243 KB
- Fidlock_Slider.stl STL · 106 KB
- Large_Fidlock_Slider.stl STL · 106 KB
- Fidlock_Sewable_Holder.stl STL · 1,2 MB
- Fidlock_Weldable_Holder.stl STL · 324 KB
- Fidlock_Holder_Fabric_Clamp_Bottom.stl STL · 264 KB
- Fidlock_Holder_Fabric_Clamp_Top.stl STL · 718 KB
- Large_Fidlock_Sewable_Slider_V2.stl STL · 1,7 MB
- Categoría
- Tecnología
- Formatos
- STL
- Descargas
- 562
- Publicado
Sobre este modelo
Custom fidlock type mechanism for only allowing parts to slide in and out one way. Files included are: 3 versions of the sliding part, one with a small base, one with a larger base, and one with a sewable base. There are also 4 versions of the holding mechanism, a basic version, larger edge version for welding, a sewable version for fabrics, and a clamping version if you can't sew into fabrics. The recommendations below are what I used to get the maximum strength out of these parts. SLICER RECCOMENDATIONS: 5-6 walls 50-100% infill Print Orientation: VERTICAL (Allows for no supports to be placed inside the pieces, keeping it clear of extra materials)
Descripción original del autor, publicada en Thingiverse.
