Shot Dispenser for 6/5/4/3 glasses
por Tprints en Printables
Dispenses the liquid in multiple glasses 100% equally
Licencia
Uso comercial permitidoPuedes imprimirlo, modificarlo y venderlo dando crédito al autor.
Al descargar aceptas respetar la licencia y dar crédito a Tprints.
Archivos (4)
- Categoría
- Hogar
- Formatos
- STL
- Descargas
- 1,338
- Publicado
Sobre este modelo
Function The reason why it works is a double tunnelsystem per tube. First the liquid goes only trough the small pipes, so the chamber gets filled. Due to the hydrostatic pressure in the full chamber, all exits get the same amount of liquid. The small tunnel also prevents a liquid waste in the device itself.
Please keep in mind that it only works if the tabel is leveled! Also you should only use glasses with the same hight.
Print The exits should face down (see picture 3 ) Print settings doesn't matter that much I printed it with PLA (PETG should be fine to) Infill 10% - 20% Gyroid 0.2mm hight 0.4 nozzle No supports needed Print time around 3.2 h
PLS post your makes 🙂
Descripción original del autor, publicada en Printables.
