Shivan
por Mikael Blomqvist en MyMiniFactory
Remake of the car "Shivan" from the pc game POD in 28mm miniature scale.
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Mikael Blomqvist.
Archivos (22)
- Shivan Bumper Front Left.stl STL
- Shivan Bumper Front Right.stl STL
- Shivan Bumper Rear.stl STL
- Shivan Dashboard.stl STL
- Shivan Exhaust.stl STL
- Shivan Front.stl STL
- Shivan Grill.stl STL
- Shivan Interior Floor.stl STL
- Shivan Ladder.stl STL
- Shivan Middle.stl STL
- Shivan Pre Supported.3Mf 3MF
- Shivan Rear.stl STL
- Shivan Roof Windows.stl STL
- Shivan Roof.stl STL
- Shivan Suspension.stl STL
- Shivan Unsupported.3mf 3MF
- Shivan Wheel Front Left.stl STL
- Shivan Wheel Front Right.stl STL
- Shivan Wheel Rear Left.stl STL
- Shivan Wheel Rear Right.stl STL
- Supporty Clip.stl STL
- Wheel_Peg 1.Stl STL
- Categoría
- Miniaturas
- Formatos
- STL, 3MF
- Descargas
- 149
- Publicado
Sobre este modelo
Remake of the car "Shivan" from the pc game POD in 28mm miniature scale. Test printed at 0.15mm layer height. The following parts will need supports: "Roof", "Roof Windows" and "Rear". See image of areas which need supports. All the other parts prints fine without supports.
I've included 3MF-files (pre-supported and unsupported) containing all the parts you need. Requires 6 standard OpenLOCK-clips available here: printablescenery.com/product/openlock-clips
*Uses the following parts from and with permission by 2nd Dynasty: "Dashboard" and "Wheel peg". Parts "Dashboard" and "Wheel peg" are Copyrighted by 2nd Dynasty AB 2nddynasty.com *Uses the OpenLOCK system designed by Printable Scenery (printablescenery.com) *Supporty clips are licensed under CC BY-SA 4.0
For full assembly print: 6 copies of OpenLOCK Clips, 4 copies of "Suspension" 2 copies of "Exhaust" 2 copies of "Ladder" 4 copies of "Wheel Peg" 8 copies of "Supporty Clip"
Happy Printing!
Descripción original del autor, publicada en MyMiniFactory.
