Shelf Bracket
por tpower118 en Thingiverse
A simple yet elegant shelf bracket, capable of holding pretty significant weight. Measures 4" (102 mm) long on each leg and 0.75" (19 mm) wide. I loaded it with about 50 lbs and it seemed to hold fine, using a couple of #6 x 2 in. wood screws into the studs in the wall. You'll also need a long...
Licencia
Solo uso personalCC BY-NC 4.0 — Atribución, no comercial
Puedes imprimirlo y modificarlo para uso personal dando crédito. No se permite vender las impresiones.
Al descargar aceptas respetar la licencia y dar crédito a tpower118.
Archivos (1)
- Categoría
- Organización
- Formatos
- STL
- Descargas
- 32,896
- Publicado
Sobre este modelo
A simple yet elegant shelf bracket, capable of holding pretty significant weight. Measures 4" (102 mm) long on each leg and 0.75" (19 mm) wide. I loaded it with about 50 lbs and it seemed to hold fine, using a couple of #6 x 2 in. wood screws into the studs in the wall. You'll also need a long screwdriver to access the screws through the holes in the bracket. For the shelf part, I just bought an oak plank at Lowes and lightly sanded it. I actually made this for a shelf so my cat could sit by the window.
Descripción original del autor, publicada en Thingiverse.
