Self-Draining Soap Dispenser Tray / no supports / 3mf included

Keep your kitchen sink cleaner and drier with the Self-Draining Soap Dispenser Tray, a practical organizer designed to automatically direct excess water back into the sink instead of letting it accumulate around your soap dispensers.

The tray features an integrated drainage channel and is designed to be installed with a slight incline so water naturally flows back into the sink. To accommodate different countertop and sink heights, the package includes two interchangeable leg options (15 mm and 20 mm), allowing you to choose the angle that best suits your setup.

The model uses a multi-part design, making it easy to print while achieving clean surfaces without supports. For additional grip during daily use, I recommend placing small rubber feet on the front underside of the tray to prevent slipping.

Designed to print 100% support-free, the package includes both STL and 3MF files.

✨ Features:

Self-Draining Design: Channels excess water directly back into the sink. Two Leg Heights Included: Choose between 15 mm or 20 mm legs depending on your sink height. Multi-Part Construction: Easy to print and assemble. Cleaner Countertops: Helps prevent water accumulation beneath soap dispensers. 100% Support-Free: Optimized for simple and reliable printing. STL & 3MF Included: Ready-to-print files included.

All Markus3D designs are Copyrighted and for PERSONAL USE ONLY. To sell prints of my models, you can subscribe to my Patreon or Thangs with the commercial tier membership. Digital files can’t be shared or resold!

➡️Patreon Markus3d (https://www.patreon.com/c/Markus3D)

➡️Thangs Markus3D (https://thangs.com/designer/Markus3D/memberships)

➡️You are welcome to follow my socials, check all my links or contact me here! (linktr.ee/Markus3d)

------------------------

🔧 Recommended 3D Printing Settings:

🖨️ Layer Height: 0.16 mm 🖖 Walls / Perimeters: 2 🔄 Infill: 20% 🚫 Supports: No 📦 Files Included: STL 3MF 15 mm Legs 20 mm Legs