Sculpted Skull Candy Jar | Halloween Storage

A rounded skull container for individually wrapped sweets, hair ties or other small desk items. The eye sockets, nose cavity, cheekbones, tapered jaw and rounded teeth are sculpted geometry. A separate wavy lid lifts straight off the top. Included files Complete default-size STL and STEP files for all 2 printed parts are included here. Each STEP is the CAD-format alternative to the matching STL, not an additional part. Dimensions and fit 155 × 114.4 × 155 mm (width × depth × height), assembled. Two internal compartments are included. The opening has a centre-line clear depth of 95.4 mm and each compartment has a 61.5 mm clear width at the mouth, tapering toward the rounded edges. Depth from rim to floor is 112.3 mm. These opening measurements do not describe a full rectangular volume: the cavity follows the face and jaw. Size options Dimensions and storage layout can be customized here:

Available adjustments include overall width and height, 1–3 internal compartments, base wall thickness and lid clearance. The lid and body regenerate together. The files here are the complete default-size version. Custom exports follow the pricing shown on the model page. Preview and credits The cover is a render of the actual model, not a photograph. STL and STEP contain uncolored geometry. The illustrated colors require painting or slicer coloring; no AMS/MMU-ready multicolor 3MF is included. Created for boxesmodel with AI-assisted parametric CAD development.

© 2026 boxesmodel — CC BY-NC-ND 4.0. Personal noncommercial printing; attribution required; do not distribute modified versions. Printing and assembly Print the body and lid separately. Remove support material from the mating surfaces, then lower the lid vertically onto the body. The locating ring inserts 5 mm with 0.45 mm nominal clearance per side. No screws, magnets or other purchased hardware are required. Do not force a tight fit; check the mating surfaces and your printer tolerance first.

Geometry, dimensions and part completeness were checked in CAD. This model has not been sliced or physically test-printed. Review orientation, supports and fit in your slicer. No tested print profile, G-code, print time or material consumption is supplied.

Dimensions are in millimetres. Print one of each STL part; STEP files are optional CAD alternatives.

For wrapped sweets or small objects only; not a food-contact-certified, airtight or child-toy product.