Scroll Saw
por RCMakerLab en Printables
Mini Scroll Saw
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a RCMakerLab.
Archivos (21)
- Scroll Saw Safe Box PLA-Infill_20.stl STL · 487 KB
- Scroll Saw Column2-PLA-Infill_100.stl STL · 282 KB
- Scroll Saw Linear Ball Bearing Part2-PETG-Infill_30.stl STL · 166 KB
- Scroll Saw Heat insulation part - PETG-OR-ABS.stl STL · 114 KB
- Scroll Saw Support Part-PLA-Infill_20.stl STL · 58 KB
- Scroll Saw ARM part - PETG-Infill_100.stl STL · 152 KB
- Scroll Saw Control Box-PLA-Infill-20.stl STL · 703 KB
- Scroll Saw XT60-Holder2-PLA-Infill_20.stl STL · 5 KB
- Scroll Saw Linear Ball bearing Part-Top-PETG-Infill_30.stl STL · 148 KB
- Scroll Saw Ring Part PLA-Infill-30.stl STL · 214 KB
- Scroll Saw XT60 Holder1-PLA-Infill-20.stl STL · 3 KB
- Scroll Saw Main Board-PLA-Infill_100.stl STL · 1,0 MB
- Scroll Saw ARM Part-PLA-Infill_100.stl STL · 305 KB
- Scroll Saw Motor Mount -PLA-Wall_4-Infill_50.stl STL · 598 KB
- Scroll Saw Control Box Cover-PLA-Infill-20.stl STL · 148 KB
- Scroll Saw Column1-PLA-Infill_100.stl STL · 632 KB
- Scroll Saw TABLE-PLA-Infill_40.stl STL · 307 KB
- Scroll Saw Linear Ball Bearing Part1-PETG-Infill_30.stl STL · 281 KB
- Scroll Saw Linear Ball bearing Optional-Large-Part-Top-PETG-Infill_30.stl STL · 148 KB
- Scroll Saw Linear Ball Bearing Optional-Large-Part2-PETG-Infill_30.stl STL · 166 KB
- Scroll Saw Linear Ball Bearing Optional-Large-Part1-PETG-Infill_30.stl STL · 281 KB
- Categoría
- Herramientas
- Formatos
- STL
- Descargas
- 2,224
- Publicado
Sobre este modelo
Many parts of the scroll saw are designed for PLA (PLA or PLA+ is recommended) filament. Some parts are designed for heat-resistant filaments (Petg, ABS, ASA). Assembly steps and details are shown in the video. The link for slicer setting information of the parts is in the detail section below the video. Settings not specified are standard slicer settings. A layer of 0.2 is suitable. The names and links of the materials required for the scroll saw are in the detail section below the video. If you like my projects and want to support me to make them sustainable... Patreon
My Youtube Channel: https://www.youtube.com/@Kendin-Yap My Web Site: https://www.rcpano.net
Descripción original del autor, publicada en Printables.
