Screw-on Spike and Dome
por Fingimajig en Thingiverse
I have used these to decorate garments and cushions. The following files are included: 2.stl: This is a spike with a rounded tip. It will need sanding to get rid of sharp, scratchy bits. 3.stl: This is a dome shape. Screw.stl: This is the threaded screw that fits into the back of the models. If you.
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Fingimajig.
Archivos (3)
- Categoría
- Cosplay y props
- Formatos
- STL
- Descargas
- 4
- Publicado
Sobre este modelo
I have used these to decorate garments and cushions. The following files are included: 2.stl: This is a spike with a rounded tip. It will need sanding to get rid of sharp, scratchy bits. 3.stl: This is a dome shape. Screw.stl: This is the threaded screw that fits into the back of the models. If you are printing multiple screws, I would recommend printing the Screw.stl model out one at a time, unless you are confident with your materials and print settings. I have found that the threaded part can break off easily when I print several of these simultaneously.
Descripción original del autor, publicada en Thingiverse.
