Screw Caps
por 3D Printing World en Thangs
These caps press on the head of Socket Head Cap Screws. There are three designs; knurled, lobed, and winged for either a M3 or M4 screw. Use a hammer, c-clamp, vice, or arbor press to press the caps on the head of the screw.
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Revisa las condicionesCCNC LICENSES - NO DIV -NO REPOST
El autor usa su propia licencia. Revisa sus condiciones en la página original antes de compartir, modificar o vender.
Al descargar aceptas respetar la licencia y dar crédito a 3D Printing World.
Archivos (6)
- SCREW CAP_M4_KNURLED.stl STL · 276 KB
- SCREW CAP_M4_LOBED.stl STL · 249 KB
- SCREW CAP_M4_WINGED.stl STL · 1,1 MB
- SCREW CAP_M3_KNURLED.stl STL · 285 KB
- SCREW CAP_M3_LOBED.stl STL · 249 KB
- SCREW CAP_M3_WINGED.stl STL · 1,0 MB
- Categoría
- Varios
- Formatos
- STL
- Descargas
- 236
- Publicado
Sobre este modelo
These caps press on the head of Socket Head Cap Screws. There are three designs; knurled, lobed, and winged for either a M3 or M4 screw. Use a hammer, c-clamp, vice, or arbor press to press the caps on the head of the screw.
The press needs to be between .005-.01" to work properly. Print one out and test it before you print out a bunch of them. If the fit is not correct scale the .stl slightly in your slicer to correct it.
Descripción original del autor, publicada en Thangs.
