Screaming Ghost LED Tealight Holder – Halloween

Set this little ghost over an LED tealight and it greets everyone with a scream: arms up, eyes wide and the light flickering out of its open mouth. It looks like the ceramic ghost lanterns you find in Halloween shops, but it prints in one piece, standing up, with no supports.

WHY YOU'LL LIKE IT - Just put it on top: the ghost is open at the bottom, so it covers any 38 mm LED tealight (up to 43 mm wide). Lift it to switch the candle on or off. - The big oval mouth is the window: the tunnel slopes down towards the candle, so you see the flame and the glow from the front. - Cute and spooky at the same time: chunky raised arms, round eyes and a wavy sheet hem. - Prints standing in one go: the roof inside is a cone and every overhang is angled, so there is nothing to support or clean up.

WHAT'S INCLUDED - 1 STL file: ghost tealight holder, 77 × 68 × 88 mm. - Original design.

#cultsoween

PRINT SETTINGS (suggested) - Supports: none · Layer: 0.2 mm · Walls: 3 · Infill: 10–15 % · Nozzle: 0.4 mm - Material: PLA - Orientation: standing on the hem, as the file comes - Colors: black with the eyes painted white (classic look), or all white for a softer glow Settings are suggestions. The model was checked in CAD for printability: no supports, closed watertight mesh.

ASSEMBLY & CARE 1. Print standing up. Nothing to assemble. 2. Optional: paint the eyes with white acrylic or a paint marker. 3. Switch on a 38 mm LED tealight, set it on the table and place the ghost over it. 4. SAFETY: LED tealights only. NEVER use a real flame (PLA softens and burns).

LICENSE Personal use only: print it as many times as you like for yourself, friends and family. Please don't share or resell the files. Want to sell prints? A commercial license is available — just send me a message.

Post a Make when you print it — I'd love to see your ghost glowing!