Scooter / Bike Phone Stand Mount (M365)

STLs All files are in correct Z orientation - Main (Use one of the following)- main.stl (for ~22.5mm handlebar) - main-short.stl (shorter stem) - main-32mm.stl (for ~32mm handlebar)

- jaw.stl - screw.stl - Clip (Use one of the following)- clip.stl (for ~22.5mm handlebar) - clip-with-loop.stl (use this if you want to hang a bag on your scooter that uses velcro loops, and you don't have any space left on the handlebar) - clip-32mm.stl (for ~32mm handlebar)

Screws & Nuts - 4x M4x20 - 8x 10mm Washers - 4x M4 Nuts - 1x M4x50 (screw this inside the printed screw to strengthen it)

About the design This is originally designed to fit Xiaomi M365 Pro scooter which has ~22.5mm diameter handlebar. But should fit on most bikes or scooters that have a straight handlebar. It needs 45mm of handlebar space. Phone sizes I've tries are from small iphone 5 to large "max" sized iphones. If you need a custom size... Comment if your handlebar is much bigger than 22.5mm, and i can give you updated STL. :) My handlebar diameter is 22.5 mm, but it should fit few mm bigger handlebars as well. For smaller diameter, you can use rubber padding.